OtherMe OA-352 फ्लक्स कॉर्ड वायर्स

About OtherMe OA-352 फ्लक्स कॉर्ड वायर्स

An OA wire for Heavy Structural Fabrication

Characteristics
LoTherme OA-352 wire is designed for single and multiple pass flat & horizontal position welding for low & medium carbon steels where high impact properties are not required. It has high deposition rate, low penetration and especially suitable for poor joint fit up.

Applications
LoTherme OA-352 is suitable for construction of farm machinery, automobiles, field erection of structures, fabrication of frames, heavy equipment repair, etc.

Typical Mechanical Properties Of All Weld Metal
ULTIMATE TENSILE STRENGTH : 530 MPa

ELONGATION (L=4d) : 22 %

Current Conditions : DC (+)

CURRENT AND PACKING DATA
Supplied in layer wound 12.5 kgs plastic spool. Each spool is sealed in a polythene bag and then packed in a shrink-wrapped corrugated box.

Note : Any other type of packaging, or other than standard wire sizes, may be available on request.

Standard Wire Diameter (mm): 1.6, 2.4 and 2.8