FW 1225 à¤¨à¤¿à¤à¥à¤² à¤à¤²à¥à¤¯à¤ à¤à¤²à¥à¤à¥à¤à¥à¤°à¥à¤¡

जांच भेजें

Request To Call Back

मूल्य/उद्धरण प्राप्त करें

MOQ : 1 Unit

एप्लीकेशन
औद्योगिक

उपयोग
वेल्डिंग

मटेरियल
निकेल

प्रॉडक्ट टाइप
इलेक्ट्रोड

Minimum Order Quantity
1 Unit

डिलीवरी का समय
10 दिन

AWS: SFA 5.14 ERNiCrCoMo-1

Under ideal welding conditions, FW 1225, a solid wire for GTAW that comes in a bright finish, provides a steady arc, smooth flow, and no spatter. It produces welds of radiographic quality. It is employed to surface steel with Ni-Cr-Co-Mo weld metal and to weld Ni-Chromium-Cobalt-Molybdenum alloys to steel and to themselves. Additionally, it is employed in applications that call for the highest strength and resistance to oxidation above 820^oC to 1150^oC, particularly when welding on nickel-iron-chromium alloy base metal. especially advised for reformer tubes, welding furnace heating elements, etc.

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Fe	P	S	Si	Cr	Ni	Mo	Co	Ti	Cu	Al
Percent	0.08	0.80	1.5	0.015	0.008	0.30	22.0	53.0	9.0	12.0	0.20	0.20	1.10

MECHANICAL PROPERTIES OF ALL WELD METAL

UTS	Elongation
(MPa)	(L= 4d)%
620	25.0

CURRENT AND PACKING DATA:

STANDARD SIZE : Diameter 1.6 mm, 2.0 mm, 2.4 mm & 3.2 mm in cut lengths of 1000 mm each.
QUANTITY : 5 kg wire put in an air-tight polythene bag and finally packed in a plastic container.

Identification AWS code is punched on both side of wire.

SHIELDING GAS: Argon

CURRENT CONDITION: DCEN

WELDING POSITION: H, F, VU, OH

Tell us about your requirement